Follow Us :
Washer Repair Toronto, ON | Certified Mechanical

Washer Repair in Toronto, ON

A broken washing machine can leave you with piles of laundry and an interrupted routine. Certified Mechanical provides reliable washer repair in Toronto, helping homeowners resolve leaks, drainage failures, and spinning problems. With over 16 years of experience, our licensed and insured team offers professional repairs, upfront estimates, and same-day appointments based on availability.

TSSA Registered Gas Services • Same-Day Availability

Certified Mechanical technician repairing a washing machine
Same-Day Service
Upfront Pricing
Licensed Technicians
6,000+ Satisfied Customers

Why Toronto Homeowners Call Certified Mechanical

We provide dependable washing machine repair Toronto homeowners can turn to when laundry appliances stop working properly.

16+ Years of Experience

Our experienced technicians diagnose washer problems and recommend practical repair solutions.

Licensed & Insured

Our licensed and insured team handles appliance repairs with care and attention to safety.

Same-Day Availability

Need urgent washer repair service? Ask about available same-day appointments across Toronto.

Upfront Repair Estimates

We explain the diagnosed issue and provide an estimate before proceeding with repairs.

Reliable Washing Machine Repair for Toronto Homes

A washer that stops mid-cycle, leaves clothes soaked, or leaks onto the floor needs proper attention. Certified Mechanical provides residential washer repair Toronto customers can request for front-load and top-load washing machines.

Our technicians inspect the appliance, identify the likely cause, and recommend suitable repairs for common problems, including:

  • Washer not spinning: Motor, belt, or drum-related issues.
  • Washer leaking water: Damaged hoses, seals, or water connections.
  • Washer won't start: Electrical, control, or door-lock faults.
  • Washer drain issues: Blocked filters or faulty drain pumps.
  • Unusual noises: Loose components, worn bearings, or drum problems.

We provide local washer repair Toronto services for homes throughout the city, including Scarborough and Etobicoke, with additional coverage across the GTA. Repair costs depend on the fault, replacement parts, and labour required. Our technicians diagnose the issue and explain the estimated cost before repair work begins.

Book Washer Repair

Toronto Appointments and Estimates

Certified Mechanical offers home washer repair in Toronto and nearby GTA communities. Final costs depend on the diagnosis and parts. Ask about current availability and an estimate.

Book Washer Repair Call 1-866-492-4679

Mon–Fri: 8am–10pm • Sat: 8am–10pm

We service all major brands:

Samsung, LG, Whirlpool, GE, Frigidaire, Maytag, KitchenAid, Bosch, and more.

Washer Repair Services We Provide

From a washer that won't drain to one that shakes the floor, our technicians repair the part that is actually failing, not just the symptom.

Book a Repair

Leaks & Drainage Problems

Water on the floor or a washer that won't drain is one of the most common calls we get. We trace the leak or blockage to its source and fix the actual cause.

What our technician checks

  • Drain pump
  • Drain hose
  • Inlet hoses
  • Door seal / gasket
  • Filter & trap
  • Water inlet valve

Washer Not Spinning

Clothes come out soaked. We check the motor, belt, drum and lid switch to restore the spin cycle.

  • Drive belt
  • Motor
  • Lid switch

Washer Won't Start

No lights, no sound, no action. We test the electrical supply, control board and door lock.

  • Control board
  • Door lock
  • Power supply

Noise & Vibration

Banging, rattling or humming that wasn't there before. We find the worn bearing or loose part.

  • Bearings
  • Drum mounts
  • Loose parts

Water Temperature Issues

Washer only runs cold, or water is too hot. We check the inlet valve and thermostat.

  • Inlet valve
  • Thermostat
  • Heating element

Cycle Stuck or Mid-Cycle Stop

Washer stops partway through or won't advance. We diagnose the timer and control system.

  • Timer
  • Pressure switch
  • Control board

Error Codes & Display Faults

Flashing lights or error codes on the panel. We read the fault and repair the root cause.

  • Error codes
  • Main board
  • Display panel

Door Lock & Seal Issues

Door won't open or close, or water escapes past the seal. We replace worn locks and gaskets.

  • Door lock
  • Seal / gasket
  • Hinges

Front-Load & Top-Load Washers

We service both styles from all major brands with the same clear, upfront estimate.

  • Front-load
  • Top-load
  • High-efficiency

Washer types we repair

  • Front-load
  • Top-load
  • High-efficiency
  • Compact
  • Stacked
  • Commercial-style

Common Washer Problems and Their Causes

Open a problem to see what usually causes it and what our technician does to fix it.

Washer won't drain or spinWater remains in the drum after a cycle
Likely causes
  • Blocked drain filter or hose
  • Faulty drain pump
  • Worn drive belt or motor coupling
  • Lid switch or door lock failure
What we do
  • Clear the drain and check the pump
  • Test the spin cycle components
  • Replace the failed part and verify drainage
Washer is leaking waterPuddles under or around the machine
Likely causes
  • Damaged or loose inlet hoses
  • Worn door seal or gasket
  • Clogged drain or faulty pump
  • Cracked outer tub or loose connections
What we do
  • Find the exact source of the leak
  • Replace hoses, seals or pump as needed
  • Test the machine through a full cycle
Washer not spinningClothes come out soaking wet
Likely causes
  • Broken drive belt or worn motor coupling
  • Faulty lid switch or door lock
  • Defective control board or timer
  • Unbalanced load or worn drum bearings
What we do
  • Test the spin circuit and motor
  • Replace the belt, switch or control board
  • Confirm the spin cycle works before leaving
Washer won't start or has no powerNo lights, no response when you press start
Likely causes
  • Tripped breaker or faulty outlet
  • Defective door lock or lid switch
  • Failed control board or timer
  • Broken power cord or wiring
What we do
  • Check power supply and door lock
  • Test the control board and wiring
  • Repair or replace the faulty component
Loud banging, rattling or hummingSounds that were not there before
Likely causes
  • Worn drum bearings or motor bushings
  • Loose or broken drum mounts
  • Foreign objects in the drum or pump
  • Unbalanced load or shipping bolts left in
What we do
  • Locate the source of the noise
  • Replace bearings, mounts or remove objects
  • Test the machine for smooth operation
Washer stops mid-cycleCycle never finishes or won't advance
Likely causes
  • Faulty timer or control board
  • Defective pressure switch or water level sensor
  • Door lock not engaging properly
  • Drain or fill problem triggering a fault
What we do
  • Diagnose the error code or fault
  • Replace the timer, switch or sensor
  • Run a full test cycle to confirm

Our Simple 4-Step Washer Repair Process

Here is what to expect from requesting service through completion inside your Toronto home, with straightforward communication.

1

Request Service

Call or complete our booking form. Tell us your washer's brand, model, and symptoms.

2

Get a Diagnosis

A technician inspects the washing machine to identify the problem.

3

Review Your Estimate

We explain the recommended repair and estimated costs so you can decide how to proceed.

4

Complete the Repair

Once approved, our technician carries out the repair and checks the washer's operation.

What Customers Value About Our Service

Choosing a local washer repair company in Toronto involves more than speed. You need to understand the fault, the expected price, and whether a repair makes sense.

Certified Mechanical publishes customer feedback on its website, including comments about responsiveness, professional conduct, and clear pricing. Read those reviews to better understand customers’ real experiences rather than relying on vague, broad promises.

"Prompt, responsive, high quality, upfront pricing, and those are very reasonable. Solid service! My washer was fixed in no time."

Anthony M2 weeks ago

"Amazing service, professional, highly recommend. They diagnosed my washer issue quickly and had the part ready."

Daniel Salt3 weeks ago

"Isaac and Mike found the problem in minutes (not the washing machine but the pipe coming out of it!). So relieved! Highly recommend."

Lynne B1 month ago

Local Coverage

We serve Toronto, Scarborough, Etobicoke, and other GTA communities. If your address is outside Toronto, contact us to check coverage and scheduling before booking.

Areas We Serve

  • Toronto
  • Mississauga
  • Scarborough
  • Etobicoke
  • Brampton
  • Vaughan
  • Markham
  • Richmond Hill
  • Oakville
  • Surrounding GTA

Frequently Asked Questions

How much does washer repair cost in Toronto?

Costs vary depending on the appliance, problem, parts needed, and labour. Contact us to arrange a diagnosis and receive an estimate.

Can you repair a washer that won't drain?

Yes. We diagnose common drainage problems, including blocked filters, damaged drain pumps, and drainage-related faults.

Is same-day washer repair available?

Certified Mechanical offers same-day appliance repair appointments in Toronto, subject to technician availability.

Do you repair front-load and top-load washers?

Yes, we service both front-load and top-load washing machines from all major brands.

Ready to Get Your Washer Working Again?

Request Toronto washer repair from Certified Mechanical. Call 1-866-492-4679 or book online for convenient scheduling.

1-866-492-4679